38
Rear Facing
with Seat Belt
3-C
7. Open the SnugLock
®
Lock-Off
Lift the lever to open the SnugLock
®
lock-off.
8. Route the Vehicle Seat Belt Under the
SnugLock
®
Lock-off
Thread vehicle seat belt through the rear-facing
belt path (marked with a blue label), through the
SnugLock
®
Lock-Off, and out the other side.
Buckle the seat belt. The seat belt should lie as
flat as possible and not be twisted.
Make sure the vehicle seat belt is in front of
the buckle strap when the buckle is in the
inner-most position, and behind when in the
outer-most position.
Review your vehicle owner’s manual for vehicle seat belt use
To Next Page