Graco Car Seat - Rear-Facing Installation with Vehicle Seat Belts

24
0LEASEREFERTOPh6EHICLE3EAT"ELTSv
TODETERMINEWHATTYPEOFVEHICLESEAT
BELTISINYOURVEHICLE
3TORErear-facing and forward-facing
LATCH belt as shown (a). Pull out on
handle on front of child restraint (b)
and adjust to rear-facing position 1 (c).
2. Place rear-facing ONVEHICLESEAT
4HREADVEHICLESEATBELTTHROUGH
rear-facing openings under the seat
PADANDBUCKLEBELT(d)$/./4PASSVEHICLEBELTOVERTOPOFTHESEATPAD
0RESSDOWNlRMLYINCENTEROFCHILDRESTRAINTTOCOMPRESSVEHICLESEATCUSHION
WHILETIGHTENINGVEHICLESEATBELT(e).
LATCH belts MUST be stored when
USINGVEHICLESEATBELTTOINSTALLCHILD
restraint.
REAR-FACING INSTALLATION WITH VEHICLE SEAT BELTS
WARNING
a
b
d
e
c