Graco Contender 65 - Page 70

70
7 Moving
LATCH
2. Slide Entire LATCH Strap Along Bar to
Correct Belt Path Opening
Rear-Facing:
Slide LATCH strap down to
the blue label.
Forward-Facing: slide the LATCH strap up
to the orange label.
3. Feed the LATCH Connector with the Adjuster Closest to it
Through the Chosen Belt Path
Rear-Facing: Make sure the
LATCH strap is routed behind the
buckle strap, is flat and is not twisted.
Forward-Facing: Make sure
the strap is flat and not twisted.
OR
70