EasyManuals Logo

Graco Extend2Fit User Manual

Graco Extend2Fit
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Lower Anchor Attachment
Lower Anchor Attachment consists of two lower anchors,
which are built-in to your vehicle, and lower anchor connectors
that are built-in your car seat. Review section 3-C, 4-C & 5-B
of this manual AND your vehicle owner’s manual.
Lower anchor attachment can ONLY be used if the vehicle
lower anchor spacing is 11 inches (28 cm) from the center
of one lower anchor to
the center of the other
lower anchor.
Typical seat in a passenger
vehicle. Other vehicle types
may have different LATCH
locations.
When Installing This Car Seat
Vehicle Seat Belt
There are two types of vehicle seat belts that can
be used When Installing Rear-Facing & Forward-
Facing. Lap/Shoulder Seat Belt or Lap Only Seat
Belt.
Only use the Lap/Shoulder seat belt
configuration when Installing As a Booster
Review section 3-C, 4-C & 5-B of this manual
AND your vehicle owner’s manual.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco Extend2Fit and is the answer not in the manual?

Graco Extend2Fit Specifications

General IconGeneral
Washing typeMachine wash
CertificationFMVSS 213
Product colorMulticolor
Car seat group-
Adjustable headrestYes
Belt fastening type5-point
Number of recline positions6
Weight and Dimensions IconWeight and Dimensions
Depth640 mm
Width487.7 mm
Height561.34 mm

Related product manuals