EasyManua.ls Logo

Graco Extend2Fit - 3-C Install Rear-Facing with Vehicle Seat Belt

Graco Extend2Fit
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
3 Rear
Facing
Car Seat Does Not Move More than
1” (2.5 cm) at the Belt Path
Level Indicator’s Bubble
is Under the Lines and
Vehicle on Level Ground
Harness Straps at or Just Below the
Child’s Shoulders.
Review section 6
Chest Clip Even With Armpits
Review section 6
Cannot Pinch Harness Straps at the
Shoulder
Review section 6
1. Store Tether and InRight™ Lower
Anchor Connectors
Attach tether hook and lower anchor
connectors to the plastic bars as shown.
3-C Install Rear-Facing with
Vehicle Seat Belt
2. Recline the Car Seat
Pull out on handle on front of child
restraint and adjust to one of the 4
rear-facing positions.

Related product manuals