Graco Extend2Fit User Manual

55
Important
4 Forward
Facing
1. Remove InRight™ Lower Anchor
Connectors from Storage Location
3. Adjust the Car Seat
Place car seat in recline position 4,
5, or 6. For Children Over 40 lb
(18.1 kg), MUST use recline position 6.
4-B Install Forward-Facing
with LATCH
2. Make Sure Lower Anchor Strap is
in the Forward-Facing Belt Path
Marked with Orange Label
If not, See section 8 to move lower anchor
attchment.
5. Place Car Seat Forward-Facing in
Back Seat of the Vehicle
Place forward-facing in vehicle seat and
center the car seat between the lower
anchors. The base should sit as flat as
possible on the vehicle seat.
4. Unhook Tether Strap From Storage
Unhook tether and lay it in the seat.

Graco Extend2Fit Specifications

General

Washing type	Machine wash
Certification	FMVSS 213
Product color	Multicolor
Car seat group	-
Adjustable headrest	Yes
Belt fastening type	5-point
Number of recline positions	6

Weight and Dimensions

Depth	640 mm
Width	487.7 mm
Height	561.34 mm