EasyManua.ls Logo

Graco Extend2Fit - Page 61

Graco Extend2Fit
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61
Important
4 Forward
Facing
4-C Install Forward-Facing with
Vehicle Seat Belt
1. Store Lower Anchor Strap
Attach InRight™ lower anchor connectors
to the plastic bars as shown.
2. Adjust the Car Seat
Place car seat in recline position 4,
5, or 6. For Children Over 40 lb
(18.1 kg), MUST use recline position 6.
4. Place Car Seat Forward-Facing in
Back Seat of the Vehicle
Place forward-facing in vehicle seat. The
base should sit as flat as possible on the
vehicle seat.
5. Make Sure Base is a minimum of
80% on Vehicle Seat.
3. Unhook Tether Strap From
Storage
Unhook tether and lay it in the seat.

Related product manuals