63
Important
4 Forward
Facing
6. Route the Vehicle Seat Belt
Thread vehicle seat belt through the
forward-facing belt path (marked with
a orange label) and out the other side.
Buckle it. The seat belt should lie as flat
as possible and not be twisted.
7. Lock the Vehicle Seat Belt
In most vehicles today, slowly pull the
shoulder belt all the way out and then
let it go back in. You will hear a clicking
sound. Slowly pull out on the belt and
it should be locked. If not, review your
car’s owner manual and section 9-D.
9. Attach Tether Strap
Extend the tether by
pressing the grey button
and pulling out on the
strap and attach.
Consult vehicle’s owner manual for
specific location.
8. Tighten the Vehicle Seat Belt
Press down firmly in the center of the car
seat. Pull on the shoulder belt to tighten
while feeding the slack back in the retractor.
10. Tighten the Tether Strap
Push the car seat back while tightening the
top tether strap to remove all the slack.
To Next Page
Loading...
