EasyManua.ls Logo

Graco Extend2Fit - Page 73

Graco Extend2Fit
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
73
5 Booster
2. Place Car Seat Forward-Facing in
Back Seat of the Vehicle
Place forward-facing in vehicle seat. The
bottom of the seat should sit as flat as
possible on the vehicle seat.
Graco allows the securing of the car seat with
LATCH system in the booster mode, only if the
vehicle manufacture allows it. The child still MUST
BE SECURED with the vehicle lap/shoulder seat belt.
LATCH can be used in the booster mode regardless
of the weight of the child up to 100 lb (45 kg).
Verify the following before using LATCH in the
booster mode:
The lower anchor attachment DOES NOT interfere
with any vehicle seat belts or buckles.
If the lower anchor attachment interferes with the vehicle seat belts or if the chosen
seating position does not have lower anchor bars, you MUST store the lower
anchor connectors. Always secure car seat with LATCH or a vehicle seat belt, even
when unoccupied. In a crash, an unsecured car seat can injure passengers.
3. Adjust the Car Seat
Place car seat in recline position 6.
L. Replace Seat Pad
Move the headrest back to its proper
position for your child.
Skip to Step 10 if Not Using LATCH
4. Unhook Tether From Storage
location and Lay it in the Seat

Related product manuals