Graco Extend2Fit User Manual

89
8 Moving
Lower Anchor
1. For Ease of Moving the Lower
Anchor Strap
A. Undo the elastic loops in front of child
restraint.
B. Pull the lower anchor connectors out
of the belt path opening, so that the lower
anchor connectors end upon the same side
of the child restraint.
8-A Moving the Lower Anchor Strap
2. Slide Entire Lower Anchor Strap Along
Bar to Correct Belt Path Opening
Rear-Facing: Slide lower anchor strap
down to the blue label.
Forward-Facing: slide the lower
anchor strap up to the orange label.
3. Feed the InRight™ Lower Anchor Connector with the Adjuster
Closest to it Through the Chosen Belt Path
Rear-Facing: Make sure the lower anchor strap is in front of the buckle
strap when the buckle is in the inner-most position (A), and in behind when in
the outter-most position (B) and that it is flat and is not twisted.
B
A

Graco Extend2Fit Specifications

General

Washing type	Machine wash
Certification	FMVSS 213
Product color	Multicolor
Car seat group	-
Adjustable headrest	Yes
Belt fastening type	5-point
Number of recline positions	6

Weight and Dimensions

Depth	640 mm
Width	487.7 mm
Height	561.34 mm