Graco Extend2Fit User Manual

95
9 Additional
Information
9-D Vehicle Seat Belts
This car seat can be installed using a vehicle seat belt. To do this, you will need to change
the seat belt to a locked mode for use with car seats. With some vehicle seat belts, this is
done with the latchplate; with other vehicle seat belts, this is done with the retractor.
Retractor
A device that winds up the unused vehicle seat belt.
It is often hidden inside the panels on the walls of the
vehicle or in the vehicle seatback.
Latch Plate
The male end of the seat belt with the silver tongue.
Seat Bight
The crease where the vehicle seat back and seat
bottom meet.
Identify Your Seat Belt Type
There are two different types of vehicle seat belts that can be used with this car seat:
Lap Belt Only
2 connection points.
Lap/Shoulder Belt
3 connections points. Can be used in all car
seats modes of use.
Some vehicles you may not
get a secure fit. Read both your
vehicle and car seat manuals.
Belts Forward of the
Seat Bight
The following types of vehicle seat belts CANNOT
be used safely with this car seat:
Lap Belt with Motorized
Shoulder Belt
Lap Belt or Shoulder
Belt Mounted on Door

Graco Extend2Fit Specifications

General

Washing type	Machine wash
Certification	FMVSS 213
Product color	Multicolor
Car seat group	-
Adjustable headrest	Yes
Belt fastening type	5-point
Number of recline positions	6

Weight and Dimensions

Depth	640 mm
Width	487.7 mm
Height	561.34 mm