Graco Fast-Flo A Series User Manual

Warnings
WARNINGWARNING
WARNING
SKINSKIN
SKIN
INJECTIONINJECTION
INJECTION
HAZARDHAZARD
HAZARD
Spray from the gun, leaks, or ruptured components can inject 󰘱uid into your body and cause
extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the
skin can also cause serious injury.
• Fluid injected into the skin might look like just a cut, but it is a serious injury. GetGet
Get
immediateimmediate
immediate
surgicalsurgical
surgical
treatment.treatment.
treatment.
• Do not point the gun at anyone or at any part of the body.
• Do not put your hand or 󰘰ngers over the spray tip/nozzle.
• Do not stop or de󰘱ect leaks with your hand, body, glove, or rag.
• Always have the tip guard and the trigger guard on the gun when spraying.
• Be sure the gun trigger safety operates before spraying.
• Close the gun ball valves when you stop spraying.
• Lock the gun trigger safety when you stop spraying.
• Follow the PressurePressure
Pressure
ReliefRelief
Relief
ProcedureProcedure
Procedure
on page 6 if the spray tip/nozzle clogs and before
cleaning, checking, or servicing the equipment.
• Tighten all 󰘱uid connections before operating the equipment.
• Check the hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.
Do not repair high pressure couplings; you must replace the entire hose.
FIREFIRE
FIRE
ANDAND
AND
EXPLOSIONEXPLOSION
EXPLOSION
HAZARDHAZARD
HAZARD
Improper grounding, poor ventilation, open 󰘱ames, or sparks can cause a hazardous condition
and result in a 󰘰re or explosion and serious injury.
• Ground the equipment and the object being sprayed/dispensed. Refer to GroundingGrounding
Grounding
on
page 5.
• If there is any static sparking or you feel an electric shock while using this equipment, stopstop
stop
sprayingspraying
spraying
immediately.immediately.
immediately.
Do not use the equipment until you identify and correct the problem.
• Provide fresh air ventilation to avoid the buildup of 󰘱ammable fumes from solvents or the 󰘱uid
being sprayed/dispensed.
• Keep the spray/dispensing area free of debris, including solvent, rags, and gasoline.
• Before operating this equipment, extinguish all open 󰘱ames or pilot lights in the
spray/dispensing area.
• Do not smoke in the spray/dispensing area.
• Do not turn on or off any light switch in the spray/dispensing area while operating or if
fumes are present.
• Do not operate a gasoline engine in the spray/dispensing area.
4
307456W

Graco Fast-Flo A Series Specifications

General

Brand	Graco
Model	Fast-Flo A Series
Category	Water Pump
Language	English