EasyManuals Logo

Graco Fire-Ball 300 D Series Instructions

Graco Fire-Ball 300 D Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
308883S
EN
Instructions
50:1 Fire-Ball
®
300
Pump
For pumping non-corrosive and non-abrasive greases and lubricants only.For
professional use only.
Model No. 239877, Series D
pail length
Model No. 239887, Series D
120 lb drum length
Model No. 239888, Series D
400 lb drum length
8400 psi (58 MPa, 580 bar) Maximum Working Pressure
140 psi (0.97 MPa, 9.7 bar) Maximum Air Input Pressure
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
This product is designed to be used only in pumping
non-corrosive and non-abrasive lubricants and
greases. Any other use can cause unsafe operating
conditions and result in component rupture, fire, or
explosion, which can cause serious injury including
fluid injection.

Other manuals for Graco Fire-Ball 300 D Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco Fire-Ball 300 D Series and is the answer not in the manual?

Graco Fire-Ball 300 D Series Specifications

General IconGeneral
TypeDiaphragm Pump
Maximum Flow Rate300 GPM
Inlet Size3 inches
Outlet Size3 inches
Pump MaterialAluminum

Related product manuals