3088744
Spray Tip Selection Table
LineLazer Tip Selection Guide. Sprayer is supplied with tip LL5319. For additional applications, use the tip
selection table as follows:
Note: the last three digits (LL5319
) of the tip part number identifies the line width and tip orifice (opening) in millimeters.
For example: the line width for tip LL5319 is 4 in. as shown in the table below. The tip orifice for tip LL5319 is 19 mm.
LineLazer Tip Selection Table
Tip Size Line Width Used For
286211* 2 inches Sport court – light film build
LL5213* 2 inches Sport court – heavy film build
LL5215* 4 inches Alkyd paints only – light film build
LL5217 4 inches Alkyd paints only – medium film build
LL5219 4 inches Alkyd paints only – heavy film build
LL5315 4 inches Most traffic paints – light film build
LL5317 4 inches Most traffic paints – medium film build
LL5319 4 inches Most traffic paints – medium film build
LL5321 4 inches Most traffic paints – heavy film build
LL5323 4 inches Most traffic paints – heavy film build
LL5417# 4 – 8 inches All paints and high solids traffic paints – light film build
LL5419# 4 – 8 inches All paints and high solids traffic paints – medium film build
LL5421# 4 – 8 inches All paints and high solids traffic paints – heavy film build
LL5621 8 – 12 inches All traffic paints – light film build
LL5623 8 – 12 inches All traffic paints – medium film build
LL5625 8 – 12 inches All traffic paints – medium film build
LL5627 8 – 12 inches All traffic paints – heavy film build
* May require 100 mesh filter to minimize tip plugging.
# Best for cold weather applications.
How to Maximize Line Quality and Reduce Tip Wear. Observe the following suggestions to increase line quality
and minimize sprayer tip wear.
1. Select a larger tip orifice and run the sprayer at a reduced operating pressure.
2. Running larger tip sizes (example: use tip LL5321 @ 2000 psi instead of LL5317 @ 3300 psi) will significantly
increase tip life and reduce tip plugging. It will also produce a more uniform film build across the line.
To Next Page
Loading...
