EasyManuals Logo

Graco Monark Instructions-Parts List

Graco Monark
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
308026 5
WARNING
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
D Ground the equipment and the object being sprayed. Refer to Grounding on page 7.
D If there is any static sparking or you feel an electric shock while using this equipment, stop spray-
ing/dispensing immediately. Do not use the equipment until you identify and correct the problem.
D Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being sprayed/dispensed.
D Keep the spray/dispense area free of debris, including solvent, rags, and gasoline.
D Electrically disconnect all equipment in the spray/dispense area.
D Extinguish all open flames or pilot lights in the spray/dispense area.
D Do not smoke in the spray/dispense area.
D Do not turn on or off any light switch in the spray/dispense area while operating or if fumes are
present.
D Do not operate a gasoline engine in the spray/dispense area.
D Keep a fire extinguisher in the work area.
TOXIC FLUID HAZARD
Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin,
inhaled, or swallowed.
D Know the specific hazards of the fluid you are using.
D Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local,
state and national guidelines.
D Always wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and
solvent manufacturer.

Other manuals for Graco Monark

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco Monark and is the answer not in the manual?

Graco Monark Specifications

General IconGeneral
TypeDiaphragm Pump
Maximum Fluid Pressure100 PSI
Air Inlet Size1/2 inch NPT
Fluid Inlet Size1 inch NPT
Fluid Outlet Size1 inch NPT
Wetted MaterialsPolypropylene, Santoprene
Flow Rate5.5 GPM
Maximum Head230 feet
Inlet Size1 inch NPT
Outlet Size1 inch NPT
MaterialPolypropylene, Stainless Steel
HorsepowerN/A (Air Operated)

Related product manuals