EasyManua.ls Logo

Graco Monark A Series 222-791 - User Manual

Graco Monark A Series 222-791
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
307–043
Rev. N
Supersedes M
INSTRUCTIONS-PARTS
LIST
INSTRUCTIONS
This
manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
Monark
Air Motors
180 psi (12 bar, 1.2 MPa) Maximum Air Working Pressure
Model
204–237, Series M
For
in-line mounting
Model
206–955, Series G
For
stanchion tube mounting
Model
205–997, Series G
Model 215–363, Series A
Model 945–972, Series A
Model 222–791, Series A
For
3 tie rod mounting
Model 207–546, Series F (Sanitary Pump)
For
hinged clamp mounting
GRACO INC. P.O. BOX 1441
MINNEAPOLIS, MN
55440–1441
COPYRIGHT
1970, GRACO INC.
Graco
Inc. is registered to I.S. EN ISO 9001
05702
Question and Answer IconNeed help?

Do you have a question about the Graco Monark A Series 222-791 and is the answer not in the manual?

Summary

Symbols

Warning Symbol

Alerts to potential serious injury or death from not following instructions.

Caution Symbol

Alerts to potential damage or destruction of equipment from not following instructions.

Equipment Misuse Hazard

Injection Hazard

Moving Parts Hazard

Fire and Explosion Hazard

Toxic Fluid Hazard

Dimensional Drawings

Mounting Hole Layouts

3 Tie Rod Pumps

Specifies mounting hole dimensions for 3 tie rod pump models.

2 Stanchion Tube Pumps

Specifies mounting hole dimensions for 2 stanchion tube pump models.

Technical Data

Installation

Grounding

Details the procedure for grounding the pump to ensure safety.

Air Motor Service

Pressure Relief Procedure

Explains the critical steps to safely relieve system pressure before maintenance.

Disassembly

Provides initial steps for taking apart the air motor for service.

Parts - Hinged Clamp Mounting

Parts - Stanchion Tube Mounting

Parts - 3 Tie Rod Mounting

Accessories

Manual Change Summary

Graco Warranty and Disclaimers

Graco Monark A Series 222-791 Specifications

General IconGeneral
WeightVaries depending on configuration. Consult product data sheet for specific model.
Pump TypePiston
Wetted PartsStainless Steel
Engine TypeNot Applicable (Air-Powered)
DisplacementNot Applicable (Air-Powered)
HorsepowerNot Applicable (Air-Powered)
Fuel TypeNot Applicable (Air-Powered)
Starter TypeNot Applicable (Air-Powered)
Fuel Tank CapacityNot Applicable (Air-Powered)
Oil CapacityNot Applicable (Air-Powered)

Related product manuals