Graco BULLDOG E Series User Manual

307–050
Rev. J
Supersedes Rev. G
and PCN H
INSTRUCTIONS-PARTS LIST
INSTRUCTIONS
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
BULLDOG

Adjust-A-Stroke Air Motor
Model 210–302, Series E
Stroke Adjustor (only) 207–583
Stroke adjuster infinitely varies the stroke length from
1–9/16 to 4–1/4 inches (39.5 – 106 mm).
Three digit indicator allows repeat settings with +/– 1%
accuracy.
These air motors and special order air motor 952–356
can be used with any of the displacement pumps
shown in the chart on pages 20 and 21. The chart also
gives the required connecting parts and pump dimen -
sions.
01812
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
COPYRIGHT 1993, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001

Graco BULLDOG E Series Specifications

General

Brand	Graco
Model	BULLDOG E Series
Category	Engine
Language	English

Summary

Equipment Misuse Hazard

Injection Hazard

Fire and Explosion Hazard

Toxic Fluid Hazard

Installation

Grounding

Safety Warnings

Operation

Pressure Relief Procedure

Step-by-step guide to safely relieve pressure in the system before servicing or cleaning.

How To Find The Stroke Setting

Troubleshooting

Service

Stroke Adjuster Repair

Detailed steps for disassembling, inspecting, and reassembling the stroke adjuster assembly.

Air Valve Repair

Procedure for disassembling and repairing the air valve assembly, including safety precautions.

Piston Repair

Reassembly

Parts List

Stroke Adjuster Parts List

ADJUST-A-STROKE Pump Variation Chart

ADJUST-A-STROKE Pump Specifications

The Graco Warranty and Disclaimers