Graco Monark G Series 205-997 User Manual

307–043
Rev. N
Supersedes M
INSTRUCTIONS-PARTS LIST
INSTRUCTIONS
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
Monark Air Motors
180 psi (12 bar, 1.2 MPa) Maximum Air Working Pressure
Model 204–237, Series M
For in-line mounting
Model 206–955, Series G
For stanchion tube mounting
Model 205–997, Series G
Model 215–363, Series A
Model 945–972, Series A
Model 222–791, Series A
For 3 tie rod mounting
Model 207–546, Series F (Sanitary Pump)
For hinged clamp mounting
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
COPYRIGHT 1970, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
05702

Graco Monark G Series 205-997 Specifications

General

Brand	Graco
Model	Monark G Series 205-997
Category	Engine
Language	English

Summary

Dimensional Drawings and Mounting

Dimensional Drawings

Provides visual representations of the air motor's physical dimensions.

Mounting Hole Layouts

Details the hole patterns and dimensions for mounting the air motor.

Technical Data

Installation

Grounding Procedure

Essential procedure for preventing static sparking and ensuring a safe system during operation.

Air Motor Service

Pressure Relief Procedure

Manual procedure to safely relieve system pressure before starting or servicing equipment.

Disassembly Steps

Step-by-step guide for taking apart the air motor for maintenance or repair.

Reassembly Steps

Instructions for putting the air motor back together after servicing.

Parts Lists

Model 207-546 Parts

Detailed parts breakdown for the Sanitary Pump model.

Model 206-955 Parts

Parts list for the Stanchion Tube Mounting Series G model.

Series G/A Tie Rod Parts

Parts for various Series G and A Air Motor Assemblies including tie rod mounting.

Accessories

Required Air Valve and Grounding Wire

Details on the required bleed-type master air valve and grounding wire for system setup.

Service Tools and Kits

Information on specialized tools and repair kits for maintaining the air motor.

Warranty and Disclaimers