25
Some infants may need extra support to keep
their head and body in a comfortable position.
Thread the harness through the openings in the
head and body support as shown and
.
MAKE SURE THAT NOTHING INTERFERES
WITH THE HARNESS. Harness must still be flat
and snug against your child’ s shoulders.
If your model does not include a body
support, you can use a rolled towel as shown
.
To prevent ejection in sudden stop or crash:
Always make sure shoulder straps are
threaded through slots and properly
positioned on shoulders.
Never allow body support to bunch or fold
behind child.
Only use head support with bottom 2 sets
of harness slots.
Make sure that harness covers do not
interfere with placement of the chest clip at
armpit level.
5.5 Head Support, Body Support and Harness Covers
(on certain models, styles vary)
To Next Page
Loading...
Need help?
General