46
1. Turn restraint over, push clip through
crotch strap slot
.
2. To clean buckle - place in a cup of warm
water and gently agitate the buckle, press
the red button several times while in
the water
. DO NOT SUBMERGE THE
HARNESS WEBBING. DO NOT USE
SOAPS or LUBRICANTS. DO NOT use
household detergents. Never lubricate
buckle.
3. Shake out excess water and allow to air
dry, harness webbing should be dry
before use
.
4. Repeat Step 2 and 3 as needed.
5. Re-attach buckle into the desired slot.
Buckle should fasten with a “click”
Re-check harness for correct installation
before use.
8.4 Buckle Cleaning Process
Prevent serious injury or death:
Buckle must be properly latched.
Periodically inspect and clean buckle to remove objects or debris
that could prevent latching.
To Next Page
Loading...
Need help?
General