EasyManua.ls Logo

Graco MYAVO - Parts List; Product Setup; Product Use

Graco MYAVO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11 12
The completely assembled stroller is shown
as

Product Use
To Secure Child - 5 Point
Harness
See images

-

To avoid serious injury from falling or
sliding out, always secure your child
with harness.
DO NOT cross the shoulder belts. This
will cause pressure on child’s neck.
Make sure the harness is adjusted
properly and your child is snugly
secured. The space between the child
and the shoulder harness should be
about the thickness of one nger.
To Adjust Shoulder
Harness Position
See images

-

For larger child, use shoulder harness
anchor A and the higher shoulder slots.
For smaller child, use shoulder harness
anchor B and the lowest shoulder slots.
In order to protect your child from
falling out, after your child is placed
into the seat, check whether the
shoulder and waist harnesses are at
proper height and length.
To Recline Backrest
See images


Calf Support
See images


To Use Armbar
See image

The Armbar has 3 positions.
Brake
See images


Always apply the brake when the
stroller is stopped. Push the stroller
slightly to ensure the brake is engaged.
To Use Canopy
See image

To Fold Stroller
See images

-

Please fold the hood before folding the
stroller.
Please remove the adaptors before
folding the stroller.
To Use Rain Cover
See image

Before using the rain cover, the infant
child restraint has to be fastened.
When using the rain cover, please
always check its ventilation.
When not in use, please check that the
rain cover has been cleaned and dried
before folding.
Do not fold the stroller after assembling
the rain cover.
Do not place your child into the stroller
assembled with rain cover during hot
weather.
To Attach Footmu
See images

-

Thread the buckle out of the
corresponding slots of the footmu.

Make sure the harness is adjusted
properly and your child is snugly
secured. The space between the child
and the shoulder harness should be
about the thickness of one nger.

Use with Graco
SnugLite Infant Child
Restraint GC1817 (May
Not Be Included)
See images

-

When using with Graco infant child restraint
SnugLite, please refer to the following
instructions.
Adjust the backrest to the lowest
position and fold the canopy.
Need to remove the arm bar before
using adaptes.
If you have any problems about using
the infant child restraint, please refer to
their own instruction manuals.
Please do not fold the stroller when the
infant child restraint is still attached.
Use with Graco
Myavo Carry Cot
See images

-

When using with Graco carry cot Myavo,
please refer to the following instructions.
If you have any problems about using
the carry cot, please refer to their own
instruction manuals.
Please do not use the product when
the babys head is lower than feet after
attached carry cot.
Always use the mattress when using
the carry cot.
Please don’t fold stroller when
attaching the carry cot.
Detach & Assemble
Soft Goods
See images

-

Remove arm bar shown as

.
To re-assemble seat soft goods, follow
the steps above in reverse

-

Parts list
A Canopy
B Armbar
C Shoulder Harness
D Buckle
E Calf Support
F Front Wheels
G Adaptors (May not be included)
H Secondary Lock
I One-Hand-Fold Handle
J Backrest Adjuster
K Storage Basket
L Brake Lever
M Rear Wheels
N Rain Cover
O Footmu
Product Set Up
Please read all the instructions in this
manual before assembling and using this
product.
To Open Stroller
See images
-
Check the stroller frame is completely
latched open before continuing.
To Attach and Remove
Front Wheels
See images
-
To Attach and Remove
Rear Wheels
See images
-
To Attach and Remove
Armbar
See images

-


Related product manuals