57
1. Remove the Back Support
See section 4-B for instructions on how to
remove back support.
Once back support is removed, store with
harness straps in a safe place.
2. Attach Base Pad to
the Back of Base
Attach the elastic straps
at the back of the seat
and through the vehicle
belt guide on the sides of seat as shown.
3. Place the Booster Seat Forward-
Facing in the Back Seat of Vehicle
Place forward-facing on a vehicle seat that
has a lap/shoulder seat belt. The base should
sit as flat as possible on the vehicle seat.
See section 5-C to secure your child.
4-C Install Backless Booster
To Next Page
Loading...
Need help?
General