Re-insert straps back onto splitter plate.
3
6
4
Remove chest clip.
DO NOT DISCARD
the chest clip.
10
Remove harness
strap loops from
splitter plate.
Pull harness straps
through seat back and
seat pad.
Unbuckle harness
by tilting top of
buckle down,
press top of
red button, and
pull tongues
out of buckle.
Remove and
discard tongues.
Slide NEW buckle
onto harness straps.
MAKE sure not to
twist straps.
Re-attach chest clip.
MAKE sure not to
twist straps.
Re-insert straps through slots
in seat pad and seat back.
See carseat owner’s manual
for proper height setting for
your child.
To loosen straps,
lift lever and pull
harness straps.
Size4Me
®
MySize
®
Fit4Me
®
Headwise
®
Buckle Replacement Guide
Turn page over to
¿QLVKWKHUHVWRI
the assembly
Steps 12 to 21
for the buckle
replacement.
©2014 Graco PD246350C 3/14
1
Squeeze handle and
pull up on headrest to
highest position.
2
5
7
8
9
11
To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
You will receive ONE of
these Graco approved
replacement buckles.
Follow instructions for
proper installation.
To Next Page
Need help?
General
