Graco True3Fit LX - Page 46

Rear Facing with Lower Anchor Attachment
4-C
46
5. Place Car Seat Rear-Facing in Back Seat of
the Vehicle
Place rear-facing in vehicle seat and center the car
seat between the lower anchors. The base should
sit as flat as possible on the vehicle seat.
6. Make Sure Base is a minimum of 80% on
Vehicle Seat.
NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 46NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 46 9/18/20 11:50 AM9/18/20 11:50 AM