Graco True3Fit LX - Page 93

Moving Lower Anchor Attachment
8
93
2. Unsnap Upper Seat Pad to Expose the Lower
Anchor Attachment
3. Remove Lower Anchor Attachment from
Storage Location
Lift seat pad and remove lower anchor
connectors from storage location. First, push on
the tab on the seat in front of the lower anchor
connector (A) and then pull on the lower anchor
strap to remove the lower anchor connector (B).
Repeat on the other side.
4. Slide Entire Lower Anchor Strap Along Bar to
the Desired Belt Path Openings
Rear-Facing: Slide Lower Anchor Strap along bar
to the front of the seat.
Forward-Facing: Slide the Lower Anchor Strap up
along bar to the top.
A
B
NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 93NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 93 9/18/20 11:51 AM9/18/20 11:51 AM