Refer to seat pad care tag for washing instructions.
Head Support Cover
Clean with a damp sponge using mild soap and cool
water. If needed, head support cover may be removed
for cleaning.
To remove, raise the head support and undo the 2 elastic
loops.
Pull off head support cover as shown
Machine wash cover in cold water on delicate cycle and
drip-dry. DO NOT USE BLEACH.
There is one type of vehicle seat belt
that can be used with this car seat:
Lap Belt Only 2
connection points.
The following types of vehicle seat belts
CANNOT be used safely with this car seat:
Lap Belt with Motorized
Shoulder Belt
Lap Belt or Shoulder
Belt Mounted on Door
Belts Forward of
the Seat Bight
Lap/Shoulder Belt
3
connections points. Can be
used in all car seats modes
of use.
Identify Your Seat Belt Type
To Next Page
Loading...
Need help?
General
