Graef CM702 - Cleaning the Grinding Mechanism; Tips

24
CLEANING THE GRINDING MECHANISM
● Remove the power plug.
● Remove the coffee bean container as described in the chapter titled “Cleaning”.
PUSH
● Turn the grinding ring to the
right as far as possible.
PUSH
● Press the “PUSH” button,
and continue to the grin-
ding ring to the right.
PUSH
● When the two arrows
point at each other
exactly, you can remove
the grinding ring together
with the upper grinding
mechanism. Remove the
upper grinding mecha-
nism from the grinding
ring.
● Clean the lower and upper grinding mechanism with the brush enclosed.
PUSH
● Turn the grinding ring
clockwise to the reques-
ted grinding degree
PUSH
● After cleaning, first of all
place the grinding ring
back on to the motor block
(arrow pointing to arrow).
● Now place the upper
grinding mechanism.
Note: In order to test whether the grinding mechanism has been set in correctly, turn the grin-
ding ring to “coarse”, such as level 20, and try to pull out the grinding mechanism by the metal
ring. If the grinding mechanism cannot be removed, it has been installed correctly.
● Place the coffee bean container on the unit.
TIPS
● Precise recommendations for grinding degree settings cannot be provided due to various
factors.
● Beans / types of beans react differently (oily, old, freshly ground etcetera).