Graef ES 702 - Page 45

45
DE
EN
FR
(15)
● Fill the tank with fresh
water.
MANUAL
● Re-insert the water
tank.
● Put a vessel underneath
the brewing unit.
● Turn the control knob
to
.
● When the vessel is full,
turn the control knob
back to “STANDBY”
again.
● Empty the vessel and
put it underneath the
steam distributor.
● Turn the control knob to
.
● After a couple of se-
conds, turn the control
knob back to “STAND-
BY”.
OK
●
Let the machine cool down, than replace the rubber seal, lter, and screw. Tigh-
ten well.
● After every descaling, also carry out a cleaning.