To Next PageTo Next Page
What to do if the compressor current is too low in my Graf Tank Equipment?
If the compressor current on your Graf Tank Equipment is too low, it could mean the compressor isn't working or isn't receiving power. To address this, check the compressor in manual mode.
How to troubleshoot no display and no light on Graf Tank Equipment?
If your Graf Tank Equipment shows no display and no light, it could be due to a power failure, the system being turned off, or no voltage at the control cabinet. Check the power supply to the system and control system. Turn the system back on. Check the supply to the control cabinet. Wait for resumption of power supply.
Why is there compressor overcurrent in my Graf Tank Equipment?
If you're experiencing compressor overcurrent on your Graf Tank Equipment, it might be due to a short-circuit. Check the supply to the control cabinet.
What causes one-sided ventilation or large air bubbles in Graf Tank Equipment?
If the ventilation in your Graf Tank Equipment is one-sided or large air bubbles appear, it could be due to a defective membrane unit or leaky air admittance valves. Contact a maintenance company to address this issue and to seal leaky air admittance valves.
General| Brand | Graf |
|---|---|
| Model | one2clean |
| Category | Water System |
| Language | English |
