3/
4.8 Standby Operation Setting
4.9 Clean Notification Setting
4.10 Additive Setting
5 Hidden Parameter Settings
5.1 General Explanations
5.2 Temperature Calibration
5.3 Chinese/English Mode Setting
5.4 Gum rollers cleaning setting
5.5 Temperature setting
5.6 Replenish Rate for Developer Pump
5.7 Calendar Setting
5.8 Pulse Calculator
6 Plate Processor Status
7 Operations
7.1 Starting Up
7.2 Standby Replenishment
7.3 Temperature Standby
7.4 Setting Operational Conditions
7.5 Auto Mode (Plate Developing)
7.6 Plate Eject
7.7 Emergency Stop
To Next Page
Loading...
