2/
Table of Contents
1
Parts Description
2 LCD Control Panel Buttons
2.1 Auto/Manual Mode Button
2.2 Set Button
2.3 On/Off Switch, Enter
2.4 Cleaning the Rollers
2.5 Increment Value
2.6 Decrement Value
3 Manual Mode
3.1 Roller Motor Switch
3.2 Chiller
3.3 Developer Fill Pump
3.4 Developer Circle Pump
3.5 Dryer Fan Heater
3.6 Developer Heater
3.7 Brush Motor Switch
3.8 Developer Replenishment Switch
3.9 Dry Fan Switch
3.10 Washing Valve Switch
3.11 Gum Switch
3.12 Reset Processed Plate Length
3.13 Reset Processed Plate Number
4 Description of Parameter Settings
4.1 Developing Speed Setting
4.2 Developing Replenishment Rate
4.3 Anti-oxidation Replenishment Rate
4.4 Power On Replenishment
4.5 Developer Temperature Setting
4.6 Brush Speed Setting
4.7 Dryer Fan Temperature Setting
To Next Page
Loading...
