7/
condition after the Plate Processor passes error diagnostics.
2.3.3 In the Set Mode, the button selects the currently displayed parameter or input
value.
2.4 Cleaning the Rollers
2.4.1 This button includes both 【gum rollers cleaning】&【skip】
functions.
2.4.2 Press this button to begin cleaning the rollers. (This function is
optional and
may vary according to the actual equipment in use.)
2.4.3 Push this button to skip executing standby replenishment
2.5 Increment Value
2.5.1 This button has different functions in the Auto Mode, Manual
Mode, and Set Mode.
2.5.2 In the Auto Mode, press the button to return to the previous
control setting.
2.5.3 In the Manual Mode, press the button to return to the previous manual control
setting.
2.5.4 In the Set Mode, press the button to increment the current parameter setting.
2.6 Decrement Value
2.6.1 This button has different functions in the Auto Mode, Manual
Mode, and Set Mode.
2.6.2 In the Auto Mode, press the button to go to the next control
setting.
2.6.3 In the Manual Mode, press the button to go to the next manual control setting.
2.6.4 In the Set Mode, press the button to decrease the current parameter setting.
To Next Page
Loading...
