Graham Vari Speed S1000 User Manual

22
SET-UP PROCEDURES
The Vari Speed S1000 has been set up at the factory to satisfy
most application needs. You may, however, wish to tailor your
control specifically to your application requirements. If so, follow
these instructions for proper set-up.
FACTORY SETTINGS
MIN SPEED Zero volts
MAX SPEED 90VDC Output for
120 VAC line
180VDC Output for
240 VAC line
Current Limit (CL) 100% of Control Rating
IR Compensation Set for no compensation
ACCEL Minimum
DECEL Minimum
NOTE: Before making any adjustments, start control and run
motor fully loaded for at least 30 minutes so motor temperature
will stabilize. (Motor speed will increase as temperature
increases).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Graham Vari Speed S1000 Specifications

General

Brand	Graham
Model	Vari Speed S1000
Category	Controller
Language	English