7
CONTROL SPECIFICATIONS
Service Factor 1.0
Form Factor 1.3 5
Duty Continuous
Overload Capability 150% for 1 minute
Speed Regulation 2% of Base Speed (for
95% Load Change)
Speed Range 50:1 @ Full Torque
Speed Potentiometer 5k ohm, 1W available accessory
Process Signal Input 0-5VDC or O-10VDC
(See Wiring and Warning on pg. 16)
Adjustments Minimum Speed (0-50%)
of motor base speed)
Maximum Speed (50
110% of motor base speed )
IR Compensation
(Adjustable from O to 25%
of rated output.)
Current Limit (10-150% of
Control Rating)
Acceleration (1/2 to 15
Seconds)
Deceleration (1/2 to 15
Seconds)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...