Grainfather Connect Control Box - Manual Operation and Features

MANUAL
Operation
&
Features
Button Press Once Hold for 3 Seconds Hold for 6 Seconds
Pump Pump On/Off (It will light up when on)
Heat Heat On/Off (It will light up when on) Go straight to boil /sets target temperature
to 100°C (212°F)
Set Turn Off Alarms Set timer (hold until timer unit flashes then
enter time using up and down arrows)
Switch between °C and °F
Up
Increase target Temperature/Time
Increase target by 2°C (3.6°F)/5 minutes
Down
Decrease target Temperature/Time
Decrease target by 2°C (3.6°F)/5 minutes
Menu
Press the up and down arrows
together to enter menu mode