SOCKET GUIDE (NORTH AMERICA 220 V ONLY)
THANK YOU FOR CHOOSING THE GRAINFATHER G30.
Get your equipment ready by following these quick and easy steps and you’ll be brewing in no time.
NOTE: These are shortened instructions for product assembly only. The full online instructions provide
more detail about the brewing process using your G30: grainfather.com/instructions/
NEMA 14-30R
NEMA L14-30R
NEMA 14-50R NEMA 14-60R
4-pin modern
laundry dryer
supply, commonly
installed after 1996.
Brewing system is compatible by
using an adapter that includes a
ground connection and has
appropriate electrical certification.
4-pin electric
oven supply.
Brewing system is compatible by
using an adapter that includes a
ground connection and has
appropriate electrical certification.
3-pin workshop and
power tools supply.
3-pin workshop
and power tools
supply.
3-pin laundry
dryer supply, most
common installation
prior to 1996.
This power supply socket is
NOT SUITABLE for use with the
brewing system. This socket provides
hot-hot-neutral connections. The
brewing system requires a ground
connection to perform safely in the
event of an electrical fault.
Brewing system is compatible by
using an adapter that includes a
ground connection and has
appropriate electrical certification.
Brewing system is compatible using
power cord supplied in-box.
POWER SUPPLY SOCKET DESCRIPTIONCOMPATIBILITY
NEMA L6-20R
NEMA 10-30R
NOT SUITABLE
NEMA 6-20R
WARNING! (NORTH AMERICA 220 V ONLY)
Please check your unit rating label for the voltage. If your unit is a North American 220 V product, the Power Cord,
Control Box and Boiler Body included in the box are designed to be used together with a 220 V supply. Using any of
these components with another product (including the 110 V G30) may result in hazards and equipment damage.
2
To Next Page
Loading...
