EasyManua.ls Logo

Gram BAKER SF 550 User Manual

Gram BAKER SF 550
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
765041982 Rev. 000 1
Operating- and servicemanual
BAKER SF 550
PROCESS KP 60 / KP 82


Other manuals for Gram BAKER SF 550

Question and Answer IconNeed help?

Do you have a question about the Gram BAKER SF 550 and is the answer not in the manual?

Gram BAKER SF 550 Specifications

General IconGeneral
BrandGram
ModelBAKER SF 550
CategoryRefrigerator
LanguageEnglish

Summary

Application

Location

Placement of multiple units next to each other

Details minimum spacing requirements for installing multiple units side-by-side to ensure proper airflow and prevent condensation.

Defrost water

General description

Electrical connection

General use

Commissioning

Overview of the control panel

Details the layout and function of the control panel buttons and display elements.

Overview of the display

Explains the program display, warning symbols, secondary display, and function bar icons.

Function bar

Describes the icons representing functions like Keyboard lock, Fan, Dry cooling, Defrosting, Alarm, and Compressor status.

Connection, display and loading of the software

Initial defrosting of the evaporator (connection when the unit is cold)

Storage program (connection when the unit is warm)

Display of the setpoint (temperature setting) in the storage program

Setting of the setpoint (temperature setting) in the storage program

Regulation in HCL, PCL, SCL

Time-controlled cooling "HCL"

Temperature-controlled cooling (Hard Chill)

Temperature-controlled cooling (Soft Chill)

Thawing program

Manual defrosting of the evaporator

Automatic defrosting of the evaporator

The user menu

LAL (Local alarm (display))

Configures local alarm settings, including upper boundary, delay, door alarm, and acoustic alarm.

CAL (Temperature offset (sensor harmonisation))

Allows temperature sensor harmonization by adjusting offsets for room and other sensors.

DEF (Number of defrosting cycles for each 24 hours)

Sets the number of defrosting cycles allowed per 24 hours.

Dry cooling

Alarm and error messages on the display

Deleting alarm messages

Door monitoring

Cleaning the condenser filter / resetting the FILTER alarm

Servicemenu

Alarm settings

Accesses submenu 'A' for configuring alarm parameters.

Presentation

Accesses submenu 'P' for display readings and settings.

Compressor

Accesses submenu 'C' for controlling compressor parameters.

Fan

Accesses submenu 'F' for controlling evaporator fan parameters.

Defrost

Accesses submenu 'D' for configuring defrost parameters.

Test Relay

Accesses submenu 'Ter' for performing manual relay tests.

Probe - A

Displays temperature readings from sensor A (room sensor).

Probe - E

Displays temperature readings from sensor E (extra sensor).

Parameter list

Alarm settings

Lists parameters for temperature limits, reset temperature, and alarm repetition intervals.

Presentation: Display

Details display parameters including setpoint display after defrosting, tolerance, and refresh rate.

Compressor

Lists compressor parameters like hysteresis, temperature limits, and pause times.

Fan (evaporator fan)

Lists parameters for evaporator fan operation, including start after defrost and running/pause ratios.

"Defrost": Afrimning

Lists defrost parameters such as number of defrosts, temperature limits, modes, and drip time.

Test Relay

Lists parameters for manual testing of compressor, fan, defrost heater, light, and buzzer.

Sensor display

Shows how to display readings from various sensors (room, evaporator, condenser, extra).

Electronic controller, overview

Changing the door hinge side

Wiring diagram KP 82

Wiring diagram SF 550 / KP 60

Piping diagram KP 82

Piping diagram SF 550 / KP 60

Related product manuals