Need help?Do you have a question about the Gram ECO and is the answer not in the manual?
General| Brand | Gram |
|---|---|
| Model | ECO |
| Category | Refrigerator |
| Language | English |
Controls the activation of the dry refrigeration function.
Controls the activation of the rapid thaw function.
Sets local alarm limits, delays, and buzzer behavior.
Configures external alarm limits, delays, and buzzer behavior.
Sets the number of defrost cycles per 24 hours.
Configures condenser overheat alarms and re-entry times.
Adjusts temperature display, freeze protection, and units.
Sets compressor cut-in/out, limits, and pause times.
Configures evaporator fan operation during defrost and idle.
Parameters for defrost stop temperature and activation.
Tests the operation of the compressor and evaporator fan.
Tests the defrost heater and internal light.
Tests alarm output relay and all display LEDs.
Displays current measurements from room and evaporator sensors.
Displays current measurements from condenser sensors.
Describes the function of various relays (K1-K8).
Details connections for safety thermostat and alarm relay.
Identifies the terminals for the 230V power input.
Lists sensor inputs (room, evaporator, condenser) and their types.
To Next Page
