Gram ECO - Start Up After Power On - Cold Product

765041642 6
Start up after power on – cold product.
On cold products, or if the product has been turned off for a short while, and the evaporator temperature is
still below the freezing point, a defrosting cycle will be activated, and refrigeration starts later.
Because the product has not been running before, the setpoint is displayed and not the current temperature.
Tekst MaxiDisplay
Normaloperation
afterstart‐upphase
hasended


Only+5°Cisdisplayed,whichisthestandardsetpointfora
refrigerator.

Situation1:
Refrigerator

Lessthanasecond
later,defrosting
starts,andusesthe
evaporatorfanfor
thedefrosting
process.


Becausedefrostingisrunning,butwithevaoratorfan,bothcontrol
lampsarelit.

Defrostmode:Air(Evaporatorfanrunning100%)

Situation2:
Extended
refrigerator

Lessthanasecond
later,defrosting
starts,andusesthe
evaporatorfanfor
thedefrosting
process.


Becausedefrostingisrunning,butwithevaoratorfan,bothcontrol
lampsarelit.

Defrostmode:Automatic(Controllerselectsacc.tosetpointwhether
fanorelectricalheateristobeused.)Ifelectricaldefrosting
is
selected,thecontrollampforfanwillnotlightup

Situation3:
Freezer

Lessthanasecond
later,defrosting
starts,andusesthe
electricalheater.


Defrostmode:Electrical(Heaterbelowevaporator)
