Gram ECO - When Servicing the Product; Start-up Sequence

765041642 4
When servicing the product.
Make sure the appliance is switched off at the socket before service is performed on electrical
parts. It is not sufficient to switch off the cabinet by the START/STOP key as there will still be
voltage to some electrical parts of the cabinet.
Start-up sequence
When the product switches ON, the software is loaded into the MPC-46.
The display shows multiple informations, see below:
Text Display
Second0‐3:
Softwareisloaded
intoMPC‐46on
start‐up


Allsegmentslightupwhite.Control,iseverythingok?
Thedisplayhasrecognizedversion3.0andawaitsmoreinformation….

Approx.3rdsecond
and3‐4seconds
forward:



NowtheMaxidisplayrecognizesprogrammevariantF3+version3.0.
Thedisplayrecognizesthattheproductisequippedwithone
compressor.


Approx.7thsecond
and3‐4seconds
forward:


Thedisplayrecognizeswhichcontrollampsareneededaccordingto
theprogrammevariantF3+,andtheappropriatelampsarelit.The
versionnumberisdisplayed.

Approx.10th
secondand3‐4
secondsforward:


Allcontrollampsareturnedoff,exceptthecompressorlamp.The
largedisplayisdisplayedreadyforuse.

