What to do if the sensor fields on my Gram KKI 7164-91 TI are not responding?
If the sensor fields on your Gram Hob aren't responding, here are a few things to check: * Ensure the hob is turned on. * Make sure you touch the sensor field for at least one second. * Only touch one sensor field at a time (unless switching off a cooking zone).
Why does my Gram KKI 7164-91 TI Hob keep switching itself off?
Your Gram Hob might be switching off for a couple of reasons: * If no sensor field is touched within 10 seconds of turning it on, it will switch off. Try switching it on and setting the heat setting quickly. * The sensor fields might be covered or dirty. Ensure they are uncovered and clean.
What to do if my Gram KKI 7164-91 TI Hob is beeping and not responding?
If your Gram Hob is beeping and not responding, it could be due to improper use, such as touching the wrong sensor fields or not touching them long enough. Try reconnecting the hob. Also, check if the sensor fields are covered or dirty; if so, uncover or clean them.
Why does a cooking zone on my Gram Hob switch off?
If a cooking zone on your Gram Hob switches off and the residual heat indicator 'H' is displayed, it might be due to a limited cook time. Try switching the cooking zone on again. Also, ensure that the sensor fields are not covered or dirty.
Why is the residual heat indicator off on my Gram Hob when the cooking zones are still hot?
If the residual heat indicator is off on your Gram Hob even though the cooking zones are hot, it's likely due to a power outage or the appliance being disconnected. The indicator will reappear the next time you turn the appliance on and off.
To Next Page
General