Grammer MSG 90.6PG - Page 116

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.6 Bellows – removal and installation
Page 2 of 5
REMOVAL / INSTALLATION TABLE OF CONTENTS
1 Lift off the seat cushion in position for
repair (Chapter 3.1).
2 Seat with operator console and
armrest for electro-pneumatic
gearshift:
2.1 Remove the cable for the electro-
pneumatic gearshift (EPS cable)
(see Chapter 3.21).
Note:
The EPS cable does not need to be
removed at the swinging structure
and at the pin contact strip.
2.2 Remove the operator console for the
electro-pneumatic gearshift (see
Chapter 3.25).
3 Remove the left covering in position
for repair (Chapter 3.4).
10
7
11
7
12
3
1
6
4
5
14
2
7
7
7
7
7
7
1
12
7
7
10
11
10
1
1313
7
7
7
1
8
9
10
2175