Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.16 Bowden pull wire for seat angle adjustment –
inspection and adjustment
Page 3 of 4
3 Check the adjustment of the right (4)
and left latch (5) in the 8 locking
positions:
• The locked latches (4, 5) must
protrude at least 1 mm from the
cutouts (arrows) in the seat frame (9).
• The unlocked latches (4, 5) must not
contact the cutouts in the seat frame
(9) over the entire adjustable range
(rattling).
11
10
9
1
2
3
4
9
5
9
7
6
3
8
To Next Page
Loading...
