Grammer MSG 90.6PG - Page 183

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.18 Handle rail – removal and installation
Page 1 of 4
REMOVAL / INSTALLATION TABLE OF CONTENTS
(1) Handle rail
(2) Rounded head screw ..............
3 Nm
(3) Bowden pull wire for seat height
adjustment
(4) Bowden pull wire for quick lowering
of the seat
(5) Bowden pull wire for vertical shock
absorber adjustment
1 Lift off the seat cushion in position for
repair (Chapter 3.1).
2 Remove the left covering in position
for repair (Chapter 3.4).
3
4
5
5
4
1
4
5
3
3
2
2
2185