Grammer MSG 90.6PG - Page 242

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.27 Lap belt – removal and installation
Page 2 of 4
REMOVAL / INSTALLATION TABLE OF CONTENTS
1 Lift off the seat cushion in position for
repair (Chapter 3.1).
2 Seat with operator console and
armrest for electro-pneumatic
gearshift:
Remove the operator console for the
electro-pneumatic gearshift (EPS)
(see Chapter 3.25).
3 Remove the left covering in position
for repair (Chapter 3.4).
4 Remove the entire covering
(Chapter 3.5).
Note:
For seat models with fore/aft isolator,
remove only the left and right
covering. Do not remove the front
covering.
5
10
6
8
7
11
9
3
2
4
4
1
2225