Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.29 Secondary belt – removal and installation
Page 3 of 3
5 Detach the webbing retaining plate (5)
at the lower suspension part (6).
6 Pull out the webbing retaining plate (5)
at the webbing (1) and remove the
webbing (1).
Installation notes:
• Both loops of the webbing (1) have
to be hung in the webbing retaining
plate (5) on the left next to the micro-
encapsulated cap screw (4).
• The webbing (1) must be placed
over the protective profile (3) inserted
into the seat frame (2).
7 Re-install the components in the
reverse order of their removal.
2252
1
2
3
4
5 1
6
To Next Page
Loading...
