Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.30 Backrest – removal and installation
Page 3 of 13
4 Remove the left covering in position
for repair (Chapter 3.4).
5 Remove the covering completely
(Chapter 3.5).
Note:
For seat models with fore/aft isolator
remove only the left and right
covering. Do not remove the covering
at the front.
6 Pull off the lever for backrest
adjustment at the bolt (see
Chapter 3.13).
Note:
Left and right Bowden pull wires need
not be taken off at the lever for
backrest adjustment.
10
F
F
F
F
2
12
3
4
5
9
8
7
11
1
6
3
2220
To Next Page
Loading...
