Grammer MSG 90.6PG - Page 335

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.40.1 Seat fore/aft adjustment – removal and installation (Actros)
Page 2 of 3
REMOVAL / INSTALLATION TABLE OF CONTENTS
1 Remove the supporting structure (see
Chapter 3.39).
Note:
The pin contact strip does not need to
be removed from the supporting
structure.
Removal and installation
2 Push the seat forwards as far as
possible.
3 Unscrew two micro-encapsulated cap
screws (5) at the front.
Installation note:
Replace the micro-encapsulated cap
screw (5), 25 Nm.
4 Push the seat backwards as far as
possible.
1
2
3
5
3
4
5
2
2
1
4
3
8
6
6
7
7
7
7
F
F
F
2241
F