Grammer MSG 90.6PG - Page 378

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.47.2 Cylinder for swivel – removal and installation
Page 3 of 4
REMOVAL / INSTALLATION TABLE OF CONTENTS
6 ATTENTION Damage!
Take care not to damage the
connection (6) of the cylinder (2). Do
not use a screwdriver or similar tools
to lift off the air hose (1) at the
connection (6) of the cylinder (2).
Cut off the air hose (1) in a clean and
straight way directly behind the
connection (6) of the cylinder (2) by
means of a sharp knife.
Installation note:
Push the air hose (1) completely onto
the connection (6) of the cylinder (2)
by exerting pressure.
Notes:
• The air hose (1) can be cut off only
once.
• After cutting off, mark the air hose
(1) in order not to cut it several times.
3
1
2
4
3
4
2
6
1
1
5
1
2
5
3
2260