Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.48 Bowden pull wire and bearing for optional backrest adjustment –
removal and installation (delivery option)
Page 4 of 8
5 Remove the lever for backrest
adjustment at the stud (see
Chapter 3.13).
6 Detach the left and right Bowden pull
wire for backrest adjustment at the
lever for backrest adjustment (see
Chapter 3.13).
Removal and installation
7 Mark the point where the Bowden pull
wire for optional backrest adjustment
(1) is fastened to the Bowden pull wire
for the left backrest adjustment (8) by
means of cable ties (7) and remove
the cable ties (7).
15
2
4
1
3
14
16
13
18
1
10
21
11
17
19
20
22
5
13
10
12
15
23
1
8
9
7
1
3
4
2
6
7
8
24
20
1
2484
To Next Page
Loading...
